In Oregon we get a lot of moisture. And while water is good for the green landscape, it is terrible for wood windows. It results in swelling and warping. It also attracts fungi that creates rot and mold. This isn’t just bad for the structure of your home, but can also lead to health problems. If left untreated the rot also attracts pesky insects like ants and termites. Eventually you get even more damage that can extend from the attic to the basement.
Unfortunately wood rot is something most homeowners in Portland, OR will have to address at one point or another—especially if you have outdated wood windows. This is why you need to address rot issues as soon as possible, before the problem becomes more widespread. It starts with recognizing the problem.
Recognizing Water Damage
Needless to say, a rotted window no longer performs as it should. But spotting rot isn’t always easy. In fact, many people don’t even notice the damage until the window frame is taken out. So here are a few of the warning signs of rotting windows:
• Peeling paint around the windows
• Softness around the window frame
• Condensation or frost between window panes
• Exterior air leaking in causing a draft
• Swollen wood resulting in difficult operation
• Unwanted noise from outside when the window is shut
• Yellowing or discoloration around the frame or on widow ledges
If you notice any of the sings it is time for a more thorough examination. And if the damage is extensive you want to start looking at replacement windows.
What is the Best Solution for Rotted Wood Frames?
There are many homeowners who try to repair the rotted wood frames on their own. For this they use a chisel to remove as much rotted wood as possible. Then they drill holes into the wood to help it dry. Then they soak the area with liquid epoxy a couple times to seal it and create a clean, sturdy base for the filler. Once the wood absorbs the epoxy they use epoxy and filler to repair the damage. Then comes sanding, filling, and patching until there is a smooth, paintable surface. Then they let the patch dry for a few days before priming and painting. It is doable, but takes a lot of work. Can you imagine doing these repairs every few years? Luckily there is a better option—window replacement.
Replacing Wood with Vinyl Windows
The problem with repairing old, rotted windows is that they are even more susceptible to future damage. To stop the problem entirely you need to replace your wood windows with a material that is strong, durable, and can withstand moisture. Vinyl windows are the way to go. These window frames are made of polyvinyl chloride. It is a construction grade plastic that is light but durable, doesn’t warp in the heat, and is impervious to water. It will not swell, flake, or rot. It is also one of the most energy efficient materials available. Best of all, they are not as expensive as fiberglass, metal, or even wood windows. No wonder vinyl windows are one of the most popular on the market today.
Contact EnergyGuard for More Information about Vinyl Windows
If you are thinking of replacing your old wood windows in Portland, OR, look no further. Our experts will get you a free quote on vinyl windows Portland, OR and answer any questions you might have about our products. Call today at 503-554-5500 or stop by 516 E. 2nd St., Newberg, OR 97132 to check out our showroom.
When it comes to enhancing the comfort and efficiency of your home, window replacement in…
When it comes to enhancing the comfort and energy efficiency of your home, window replacement…
When it comes to enhancing the comfort and efficiency of your home, window replacement is…
At EnergyGuard Windows & Doors, we understand that upgrading your windows is a significant investment.…
Getting new windows installed is an exciting step toward enhancing the comfort, energy efficiency, and…
Replacing the windows in your home is a significant decision that can enhance comfort, boost…