Spring Cleaning Tips for Your Home Windows

Daylight Savings time in Beaverton, OR is just around the corner. With the time change comes thoughts of warmer weather, budding flowers, and spring—finally! It also means you are probably thinking about getting your home ready for the change in season. All that winter debris has found its way onto your windows, leaving them a little grimy. If you don’t take the time to clear it away, the buildup can make your windows difficult to operate. Or you might permanently damage the tracks your window slides up and down on. Don’t let that happen! Here are some steps to follow so you can get your windows in top shape, just in time for the nicer weather:

Step 1. Assemble Your Tools

Before getting started, you want to make sure you have everything you need on hand. Along with some soft, lint-free cloths and your favorite glass cleaner, you also want to gather some mild detergent, a soft bristle brush, a plastic putty knife, and some silicone lubricant. You might also want your vacuum cleaner. DO NOT use high pressure washers, razor blades, or abrasive cleaning solutions on your windows.

Step 2. Remove Screens and Sashes

This depends on the types of windows you have. For casement windows and sliders, you want to remove any screens to access the tracks. For double-hung windows, you can usually tilt the panes and clean both interior and exterior glass from the inside.

Step 3. Wipe the Frames

Next, remove dirt and dust from the surface of your window frames. This is where the mild detergent comes in. Combine it with water and use a damp cloth to wipe away grime. Then, rinse out your cloth and use clear water to wipe off the soap. Do not let water drip down the frames. It could collect in the bottom of your windows and cause you trouble later.

Step 4. Clean the Glass

Everyone has their own tried and true method for cleaning windows. Some insist on using a solution of water and vinegar, others say newspapers are the best way to get a streak free shine. Try a few different products and methods until you find something that works for you. Our favorite secret is using a dry blackboard eraser on the glass once it is clean and dry.

Step 5. Clean and Grease the Track

Vacuum away lose debris and then use the soft bristle brush or plastic putty knife to dislodge anything that is stuck. Once you have a clear track, wipe it with a clean, dry cloth. Then spray your silicone lubricant on your cloth and wipe down the track or jamb liner. For casement windows, you will want to clean and lube any moving parts. Do not spray directly on the track or hinges. You might have to clean up the overspray and that isn’t easy.

Step 6. Clean the Screens

Last, but not least, place the screens in the shower or on a flat surface outside. Gently spray them down with the shower head or garden hose. You can use your mild detergent and soft bristle brush again to clean away tough dirt. Rinse with clear water and let the screens dry before replacing them.

Getting ready for spring is also a great way to evaluate the condition of your windows. If you notice cracks, leaks, or condensation between the panes then you might consider getting new windows in Beaverton, OR. Call us at EnergyGuard Windows & Doors today for a free in-home design consultation and estimate. Our number is 503-554-5500. Or you can come visit our showroom at 516 E. 2nd St., Newberg, OR 97132.