When it comes to replacement windows in Portland, OR, the product is only as good as its installation. Because one mistake or miscalculation could render even the best windows completely worthless. This is why it is so important to hire trained professionals to install your replacement windows. If not, you might start noticing some of these signs of poor window installation.

1. Caulk is Sloppy

Caulk application is one of the last steps in window installation. It helps seal the window and protects against leaks. Professionals should apply the caulk evenly with a patient hand so the finish is clean and smooth. But if the installer is in a rush, caulk can appear uneven and sloppy. There might even be gaps or cracks in the caulk. If the installer didn’t take the time to do this part of the job well, you might start to wonder what other aspects of the job were neglected?

2. Window Doesn’t Open and Close

New windows in your home should open and close without much effort. This is more than simple convenience. Egress windows should function as a means of escape in case of an emergency. What happens if these windows do not open? It could be disastrous. This is why it is important to test all of the windows after the installation to make sure they do not stick. And if you happen to find a window that is difficult to open and close, you should call the installers back and have them fix the problem as soon as possible.

3. Condensation Trapped between Panes

Condensation caused by humidity will come and go on the exterior surfaces of your windows. This is common and no cause for concern. However, if fogging appears between the panes of glass, that is something to worry about. This means you have a broken seal on your window. It could have been caused during manufacturing, in transit, or during installation. However it happened, this window no longer provides the level of insulation you paid for with your new windows and you will want to address the issue with your installers.

4. Window Leaks Air and Moisture

Sometimes it isn’t always easy to see leaks, but you can certainly feel them. Drafts from new windows should not happen. Even if the leak isn’t obvious, it will still result in energy losses that should not be happening. And moisture damage is another major concern. At first you might only notice some discoloration or peeling paint. But if a leak is left for too long it could result in structural damage to the home that will be even more expensive to repair.

5. Window Isn’t Level

This is a clear sign the installation crew didn’t do their job. Windows need to sit level inside the fame not only for aesthetics but also for functionality. It allows water to drain properly and doesn’t put too much strain on the structure of the window.

For the best replacement windows in Portland, OR and for the best professional installation contact our experts. With over 40 years of experience, we can make sure you get the best products to suit your home and budget.

rrmseo

SEO - Ring Ring Marketing

Recent Posts

Preparing Your Home for Window Installation Success

Getting new windows installed is an exciting step toward enhancing the comfort, energy efficiency, and…

5 days ago

Top Mistakes to Avoid When Replacing Your Windows

Replacing the windows in your home is a significant decision that can enhance comfort, boost…

2 weeks ago

When to Repair vs. Replace Windows in Portland OR

At EnergyGuard Windows & Doors, we know that deciding between repairing your existing windows or…

3 weeks ago

Best Ways to Choose New Windows

At EnergyGuard Windows & Doors, we understand that selecting new windows for your home is…

4 weeks ago

Top Signs It’s Time to Replace Your Windows

At EnergyGuard Windows & Doors, we understand that your windows are essential to your home's…

1 month ago

10 Common Mistakes to Avoid During Window Installation

At EnergyGuard Windows & Doors, we understand the importance of proper window installation. When it…

1 month ago