Blog Category

Get Your Home Windows Ready for Winter

It might seem a bit early to start thinking about winter, but before you know it the leaves will change and a chill will creep into the air.  Windows are an essential part of the home, but they are also one of the most vulnerable features. Fortunately, there are a lot of important things you can do to get your windows ready for winter. Here are a few methods you might keep in mind including replacement windows in Portland, OR.

1. Check for Proper Insulation

During the winter your home energy bill will increase significantly. The bill can be even higher due to improper installation. The heat will escape and cost will go up every time your furnace is turned on. Warning signs of inefficient insulation include window panes rattling in the wind, condensation in the corners or edges of the window, temperature fluctuations in the surrounding area near a window, and difficult window operation. Another thing you can do is perform an energy audit of your home. Testing for leaks can be simple. Close all exterior windows and doors. Run exhaust fans in your home. Then simply light a match and running around the frame of the windows and doors. If the flame or smoke pulls inward, it is likely you have a leak.

2. Repair Damaged Windows

If you have a cracked or broken window it can have a major impact on the insulation of your home. Even if just the exterior pane is cracked it will significantly reduce the energy efficiency of the product and leave your home vulnerable to drafts and moisture leaks. It is important to repair any damaged windows as soon as possible. Otherwise, the crack is only going to get worse with exposure to cold and ice.

3. Seal Up Leaks

Heat losses through leaky windows can account for up to 30% of your total energy bill. A simple way to improve the insulation in your home is to seal up leaks with caulk and weather stripping. You can find useful products in most hardware stores. Most are easy to install and only take one afternoon of doing it yourself. This simple step and help prepare your windows for winter and significantly reduce your heating costs all season long.

4. Install Heavier Window Coverings

Another way to add insulation to your windows is with thicker window treatments. Heavier drapes, solid shutters, or layers of curtains will help trap the cold against the window so it is less likely to leak into your home and keep your rooms feeling cozy and comfortable.

5. Consider Replacement Windows

If the windows in your home are more than 15 years old they might have outlived their usefulness. A few signs that it is time for replacement windows include damage, difficult operation, outdated style, and inefficient glazing. Upgrading to replacement windows means you can take full advantage of all the modern insulating technologies like inert gas fills, low-E coatings, and insulating frame materials.

For more information on replacement windows in Portland, OR contact the experts at EnergyGuard Windows & Doors. We are currently taking the necessary precautions to keep you safe and offer easy, stress-free service.

rrmseo

SEO - Ring Ring Marketing

Recent Posts

Preparing Your Home for Window Installation Success

Getting new windows installed is an exciting step toward enhancing the comfort, energy efficiency, and…

5 days ago

Top Mistakes to Avoid When Replacing Your Windows

Replacing the windows in your home is a significant decision that can enhance comfort, boost…

2 weeks ago

When to Repair vs. Replace Windows in Portland OR

At EnergyGuard Windows & Doors, we know that deciding between repairing your existing windows or…

3 weeks ago

Best Ways to Choose New Windows

At EnergyGuard Windows & Doors, we understand that selecting new windows for your home is…

4 weeks ago

Top Signs It’s Time to Replace Your Windows

At EnergyGuard Windows & Doors, we understand that your windows are essential to your home's…

1 month ago

10 Common Mistakes to Avoid During Window Installation

At EnergyGuard Windows & Doors, we understand the importance of proper window installation. When it…

1 month ago