Getting new windows is exciting. There are so many benefits including better insulation, more natural light, and improved aesthetics. And you want to keep your windows in Portland, OR looking new for as long as possible. For top performance, here are a few cleaning and maintenance tips you can follow.
The first step is to inspect your windows once a month to make sure there are not any cracks, warping, or signs of water damage. You should also check the operation of your windows to make sure they open and close smoothly with very little effort. This will allow you to be so familiar with your windows that if a small problem does arise, you can address it early and prolong the life of your windows.
Cleaning the window frames should be another facet of routine maintenance. After you have inspected your windows, wipe down the frames with some mild detergent, water, and a soft cloth. Use a soft-bristle brush for tougher dirt stains. These basics are all you need to keep the window frames looking in top shape. No need for harsh chemicals, abrasives, or power washers. Using these products on your new windows will cause more harm than good. And the last thing you want to do is accidentally damage your windows during maintenance.
The next step is to clean the glass. Again, all you need is some mild detergent or a generic glass cleaner. You can squeegee the outside of your windows. But for inside you will want to polish the glass with a lint-free cloth for that brilliant shine. While cleaning the glass you will want to look out for cracks in the glass as well as any condensation trapped between the panes. Either one of these could indicate seal failure and require immediate attention.
Many homeowners forget to remove and clean the window screens as part of their regular home maintenance. Windows screens are exposed to the elements throughout the year. They are meant to block pests, but also help trap dust and pollen. Needless to say, they get dirty. And washing them off every couple of months will help keep them in top shape. Simply remove the screens and lay the down on a flat surface or prop them up in the shower. Spray them down, scrub them with mild detergent and a soft-bristle cloth, and rinse thoroughly. Allow the screens plenty of time to dry before replacing them in the window frame.
Last, but not least, you want to be sure the moving parts of your windows get cleaned and lubricated. This means removing loose dirt with a vacuum. If anything is wedged in the track try and use a plastic putty knife to remove it. Once the track is clear, apply a silicone lubricant. We recommend spraying directly into a cloth and then wiping down the parts so you do not get any overspray on your clean windows and frames.
That is it! These simple tips will help you keep your new windows in Portland, OR in top shape. For more help finding the right windows or more tips on window maintenance, contact our experts today.
Getting new windows installed is an exciting step toward enhancing the comfort, energy efficiency, and…
Replacing the windows in your home is a significant decision that can enhance comfort, boost…
At EnergyGuard Windows & Doors, we know that deciding between repairing your existing windows or…
At EnergyGuard Windows & Doors, we understand that selecting new windows for your home is…
At EnergyGuard Windows & Doors, we understand that your windows are essential to your home's…
At EnergyGuard Windows & Doors, we understand the importance of proper window installation. When it…